Linker Nutrients
Pellet mill on its mezzanine in a feed mill, with the enclosed chute running down to the cooler

For the feed mill

Feed Solutions: feed additives for feed mills and formulators

Feed additives for livestock, poultry and aquaculture feed, for the people who make it: the formulator balancing cost against performance, the quality manager who answers for what leaves the cooler, the mill manager who answers for both. Every additive in the range answers a specific problem: start from yours, or from the category you already know.

From the problem to the programme

Pick the row that sounds like your week. A solid hexagon marks the step in the mill where a platform is applied; an outlined hexagon, an inclusion point set with you. Each row opens its programme.

Problems in rows, steps in columns. A dot marks the step where a platform comes in; each row opens its programme.
At the feed mill
Your problemIntakeMixingSet with youThe programme
Mycotoxins in raw materialsMould inhibitor or mycotoxin binder?LinkafixLinkamoldLinkafixLinkamold
Feed going mouldy in storageHeat, moisture, storage timeLinkamoldLinkamold
Fats turning rancid, vitamins lostOxidation, from the fat tank to the premixLinkatiox
Piglet weaningIntake, stomach acidity, butyrateLinkazoicLinkatribLinkacidLinkasel
The formula they will not eatBitterness, by-products, a change of raw materialLinkastyLinkasweet
Pellets, moisture, mill outputThe water added at the mixerLinkamold
Dietary fat not fully usedEmulsification and energyLinkalyso
  • Step where the platform is applied, read from its product page
  • Inclusion point set with you, on your line

The platforms, by category

Each name opens its product page: grades, use, documents.

Feed safety and preservation

Between intake and the feeder, feed can go mouldy, turn rancid, or arrive loaded with mycotoxins. Each risk has its tool: one does not stand in for another.

See Feed safety and preservation →

Digestion and performance

Acids, butyrates, monoglycerides, lactic bacteria, tannins, an emulsifier: each lever works in one precise place and is chosen for a formula and a stage. No feed additive replaces an antibiotic.

See Digestion and performance →

Flavours and sweeteners

A least-cost formula can be right in the spreadsheet and wrong in the trough. A flavour covers what the animal refuses; a sweetener gives a clean sweet taste.

See Flavours and sweeteners →

Nutritional and functional ingredients

Two ingredients that each do a specific job: a betaine, methyl donor in metabolism and osmoprotectant in the cell, and a Yucca schidigera extract for poultry and pig feed.

Stainless-steel spray bar inside an open paddle mixer, nozzles above the mash: the principle of a liquid application

Linker Flow

When the additive is a liquid

A mould inhibitor diluted in the water added at the mixer, an active applied after the press rather than sent through the conditioner: a liquid is only as good as the line that delivers it. Linker Flow brings together the product and, with our technical partners, the dosing and spraying equipment, the installation and the follow-up.

Frequently asked questions

Which feed additives for livestock does Linker Nutrients supply?

Four categories. Feed safety and preservation: mould inhibitors, antioxidants and a mycotoxin binder. Digestion and performance: acidifiers, butyrates, tributyrin, monoglycerides, a postbiotic, a probiotic, tannins and an emulsifier. Flavours and sweeteners, for palatability. Nutritional ingredients: betaine and yucca extract. Most platforms come in several grades.

Do you publish inclusion rates?

Yes, on each platform’s page, where the current technical data sheet for the grade gives one; otherwise, rate on request. The right rate depends on the species, the stage, the formula and the process: a technician works it out with you.

Which species do your feed additives cover?

Poultry, pigs, ruminants and aquaculture, with pet food on request, though not every platform covers every species: the catalogue can be filtered by species, and each product page states its uses. What is dosed on the farm, through the drinking water or on the litter, is in Farm Solutions.

Do you adapt a product to a specific formula or process?

Up to a point. Alongside the grades in the range, we look with you for the form that suits your line: powder, liquid or coated granule, or a liquid built for one application point. Tell us the constraint; sometimes the answer is no, and you will get that answer rather than a product that does not fit.

Tell us what you are formulating

You formulate feed

Send us the constraint, the species and the problem you are trying to solve. You get a technical answer: a platform, a grade and how to include it. When two technologies in the range compete, we tell you which one suits your formula, including when it is the cheaper one.

Need a formula suited to your raw materials, your constraints or your market? Let’s talk.

Talk to a formulator →How we work, from the constraint to the trial →

You distribute

You are looking for a range to represent in your market, with technical depth behind every product. Let us talk about your territory and your portfolio.

Become a distributor →Quality →

Or directly: +33 2 30 91 59 15 · contact@linkernutrients.com